In order to customize the glass water bottle to achieve the desired effect, we must know the specification, size and capacity measurement of the glass water bottle.
1. Measure the thickness of the customized glass water bottle mouth 10 mm below the edge of the glass water bottle mouth with a thick and thin caliper.
2. The outer diameter of the glass water bottle bottom shall be measured with vernier caliper, and the measurement position shall be subject to the average diameter of the glass water bottle bottom plane.
3. The outer diameter of glass water bottle mouth shall be measured with vernier caliper, and the measurement position shall be subject to the average diameter of glass water bottle mouth plane.
4. The height of glass water bottle shall be measured with vernier caliper, and the measurement position shall be subject to the vertical distance from bottle mouth to bottle bottom.
5. The thickness of the bottom of the glass water bottle shall be measured with a vernier p-rule, and the depth gauge of the vernier caliper shall be vertically extended into the inner side of the glass water bottle to the center of the bottom, and the reading shall be recorded; the height of the glass water bottle shall be measured with a vernier caliper, and the reading shall be recorded; the thickness of the bottom of the glass water bottle shall be the difference between the two readings minus the height of the bottom concave.
Glass water bottle customized capacity measurement: take a few ml of water at room temperature greater than the capacity of the sample glass water bottle, record the reading, then fill the sample glass water bottle with water, record the reading of the remaining water in the measuring cylinder, the difference between the two readings is the capacity of the glass water bottle, which is related to the specification and size, so we also need to master it well.
VN 
EN 
JA 
KO 
MY 
TH 
NL 
FR 
DE 
ES 
PT 
RU 
TR 
AR 
ID